How to Turn On the TongueJoy basic unit and the TongueJoy battery pack:
With the batteries correctly installed in either the TongueJoy basic unit or the Turbo TongueJoy battery pack, simply screw the TongueJoy Oral Vibrator body into the side hole of the battery housing or Turbo fitting. Fully tighten the vibrator body and the TongueJoy will begin to vibrate; simply loosen to turn off vibration. If the TongueJoy does not vibrate, check the battery installation and verify that both batteries are installed correctly. Also make sure that both battery end caps are fully tightened onto the batteries in the TongueJoy basic unit.
The Turbo battery pack has a power control slide switch. The slide switch has four positions: Off, Low, Medium and Full Power for your TongueJoy. If your TongueJoy does not begin to vibrate when screwed into the Turbo fitting, make sure you have slid the power control switch from Off to one of the three power settings. With the Turbo accessory you have total TongueJoy power control. The Turbo really adds vibration power to the unit, you may want to use the included TongueJoy Silicone Sleeve with the Turbo to add comfort for those with sensitive teeth or dental work. The Turbo battery pack wire is very thin, flexible and somewhat fragile, therefore consider-able care should be taken when handling the Turbo battery pack wire especially where the wire enters the vibrator fitting and battery pack housing.
How to Use the TongueJoy :
Choose the elastic band that is most comfortable for you tongue; there are three sizes. Simply insert the TongueJoy vibrator body post through the hole in the elastic band you chose and screw the vibrator body into the battery housing or Turbo fitting. Tighten the vibrator body to start the vibrations. Slide the elastic band with the TongueJoy onto your tongue. Slide the elastic band and TongueJoy using your fingers as far back on your tongue as is comfortable. The TongueJoy is now ready for use. When using the Turbo, you may want to use the included TongueJoy Silicone Sleeve on the vibrator body to add comfort and texture.
If your tongue is pierced, use the optional custom TongueJoy barbell to hold the TongueJoy. Simply slip the TongueJoy post through the hole in the TongueJoy barbell. Insert TongueJoy barbell through your pierced tongue. Tighten the vibrator body to start the vibrations. You are now ready for fun! Whether using the elastic band or the barbell, the TongueJoy and your tongue will give a tingling pleasure. But don't stop there! The TongueJoy can be attached to a finger, toe, or any body parts using the included different size elastic bands. The TongueJoy can be directed any way you can imagine.